CATAMARAN BUILD - Over 50 feet of Glassing in One Afternoon!! (MJ Sailing - Ep 189)
** Become a Patron, and get your NAME written on our Catamaran!!
https://www.patreon.com/mjsailing **
Now that we have bonded the bridge deck together, it's time to glass all 50 feet of the inside seam. There's multiple steps involved, including making sure all parts of the seam which did not have our methacrylate bonding agent push through, get a bit of thickened resin pushed inside. From there we cove any open spaces in the flange and wait for that to get tacky before we can add our fiberglass.
The seam receives two layers of 1208 fiberglass, with a bottom layer of 150 mm, and another layer of 100 mm covering it. To get this seam as smooth as possible, it receives a good coating of resin, and then has all air bubbles rolled out with a fin/metal roller. The last step is to apply Peel Ply cloth, which leaves for a fare/smooth surface, and also helps to push out the last of the air bubbles.
The next day, once all of this has cured, the two of us tackle the task of lifting the 38 ft hull sides up in the air. We do this so we have a better opportunity to level the hull before it receives 5 strips of unidriectional fiberglass from one hull to the other. (This prepares the areas for bulkheads ) Once in place, it will be nearly impossible to make adjustments to the hull.
We hope you enjoy!
Much love from Annapolis!
Jessica, Matt & Georgie
Link to our boat: https://maxcruisemarine.com/max42sc-sailing-catamaran/
Thank you SO MUCH to our Patrons. These amazing supporters help keep us on the boat, our camera equipment up to date, and the videos coming. Without our patrons, these videos would not be possible.
To join the Patreon ranks, please visit http://www.patreon.com/mjsailing
or
Buy us a beer through PayPal!
https://www.paypal.me/MJSailing
or
Help contribute to the build by shopping our Amazon Wish List!
https://www.amazon.com/hz/wishlist/ls/2B2BOYEH9THAH?ref_=wl_share
Delivery address:
Kentmorr Marina
910 Kentmorr Road
Stevensville, MD 21666
Thank you!,
Matt & Jessica
--
Our Online shop: https://mj-sailing.myshopify.com/
Videos made by Jessica, featuring Matt and Georgie.
00:00 - Today's Job - Glassing the Bridge Deck Seam!
01:12 - Intro
01:42 - So Much Thickened Resin!!
07:02 - A Wetting Table for our 1208
07:33 - How To Fiberglass a Seam (In Case You Wondered)
11:33 - It's Late, and We're Punch Drunk
13:18 - Flying Along Through Projects
16:02 - Getting 2 People to Life a 38 ft Hull Side
18:45 - Time to Unbolt and Raise!
20:30 - GET YOUR NAME PERMANENTLY WRITTEN ON OUR BOAT!
22:05 - Closing
Music:
A Million Signs - Vividry
Ain't Nobody Else But You - Chris Shards
Mississippi Hornpipe - Roy Williams
Pandemonium - The Mondays
Salt Lake Seagull - Chris Shards
Camera equipment used:
- Panasonic Lumix GH5
- Shure VP83F shotgun microphone - https://amzn.to/2rsIHLL
- GoPro Hero8 -
Previous Boats:
1983 Trisalu 37 - custom aluminum, built in Quebec (Elements of Life)
Where we've been: 2.5 year refit in Indiantown, Florida; Abacos, Bahamas; St. Barth's; St. Maarten; Antigua; Saba; Azores; Ireland; Scotland; Norway; England
1989 Sabre 34 Targa (Serendipity)
Where We Sailed Her: U.S. - Bahamas - Jamaica - Cuba - Cayman Islands - Honduras - Guatemala - Belize - Mexico - Bermuda - Azores - Madeira - Canary Islands - Sint Maarten - BVI's - USVI's
Editing software:
Adobe Premier Pro
Website:
http://www.mjsailing.com
Facebook:
http://www.facebook.com/mattandjessicasailing
Instagram:
https://www.instagram.com/mattandjessicasailing
&
https://www.instagram.com/mj_wayfaring/
