CATAMARAN BUILD - Our Stern Bulkheads Need To Be PRECISE For Our Transom! (MJ Sailing - Ep 205)
Before our last two bulkheads go in, we need to make sure they sit in their EXACT place, as there is no margin of error.
Because the large transom piece we received with our second container sits as a cap over these two bulkheads, we need to make sure each edge is lining up. But because this piece is 24 ft wide and weighs over 500 pounds, it's not easy to bring it in and out for a dry fit. So, we're going to do our best with measurements between the two and hope for the best.
As we go to glass in bulkead 8 though, we find that our new vinyl ester resin is not behaving well in these summer temperatures, and is making it very hard for us to work. A slight set-back, but we know we'll find a way around it to make everything work.
We hope you enjoy!
*Taking measurements off transom - filmed on August 09
*Bonding aft side of bulkhead 8 - filmed on August 09
*Bonding forward side of bulkhead 8 - filmed on September 10
Much love from Annapolis!
Jessica, Matt & Georgie
Link to our boat: https://maxcruisemarine.com/max42sc-sailing-catamaran/
Thank you SO MUCH to our Patrons. These amazing supporters help keep us on the boat, our camera equipment up to date, and the videos coming. Without our patrons, these videos would not be possible.
To join the Patreon ranks, please visit http://www.patreon.com/mjsailing
or
Buy us a beer through PayPal!
https://www.paypal.me/MJSailing
or
Help contribute to the build by shopping our Amazon Wish List!
https://www.amazon.com/hz/wishlist/ls/2B2BOYEH9THAH?ref_=wl_share
Delivery address:
Kentmorr Marina
910 Kentmorr Road
Stevensville, MD 21666
Thank you!,
Matt & Jessica
--
Our Online shop: https://mj-sailing.myshopify.com/
Videos made by Jessica, featuring Matt and Georgie.
00:00 - This Has To Be PRECISE!!
00:49 – Intro
01:19 – Placement of Bulkhead 8
02:13 – Measuring from our molded transom
04:27 – How it caps over the back
05:42 – Dry fitting into place
09:55 – An uninterrupted look at glassing
12:07 – Yesterday did not go as planned
13:23 – It's actually Jessica who does all the work
15:35 – A second attempt - will today work?
18:37 - Summer storms over the bay
19:40 – Closing
Music:
Big Week - Dylan Sitts
BLK BOY JOY - Tilden Parc
Walking Around - Coma Svensson
Pandemonium (Tribute Version) - The Mondays
Camera equipment used:
- Panasonic Lumix GH5
- Shure VP83F shotgun microphone - https://amzn.to/2rsIHLL
- GoPro Hero8 -
Previous Boats:
1983 Trisalu 37 - custom aluminum, built in Quebec (Elements of Life)
Where we've been: 2.5 year refit in Indiantown, Florida; Abacos, Bahamas; St. Barth's; St. Maarten; Antigua; Saba; Azores; Ireland; Scotland; Norway; England
1989 Sabre 34 Targa (Serendipity)
Where We Sailed Her: U.S. - Bahamas - Jamaica - Cuba - Cayman Islands - Honduras - Guatemala - Belize - Mexico - Bermuda - Azores - Madeira - Canary Islands - Sint Maarten - BVI's - USVI's
Editing software:
Adobe Premier Pro
Website:
http://www.mjsailing.com
Facebook:
http://www.facebook.com/mattandjessicasailing
Instagram:
https://www.instagram.com/mattandjessicasailing
&
https://www.instagram.com/mj_wayfaring/
